SilverCrest SBKL 5.0 A1
9. Getting started
9.1 Powering the headphones on/off
How to switch the headphones on:
1. Press and hold the multi-function button (3) for at least 2 seconds. The
headphones will emit a beep. The LED indicator (5) lights up in blue.
If this is the first time you are powering the headphones on and they have
not previously been paired with any device, they automatically start in
pairing mode. In pairing mode, the LED (5) flashes quickly in blue. Please
refer the next chapter for pairing your device.
How to switch the headphones off:
1. Press and hold the multi-function button (3) for about 5 seconds. The
headphones will emit a beep. The LED indicator (5) lights up for one
second in blue and then goes out.
9.2 Pairing the headphones
In order to make telephone calls or listen to music on your smartphone (or
another Bluetooth-compatible device) using the headphones, you first need
to pair the headphones to your smartphone. You only need to pair the
devices once. If you switch the headphones another time and your
smartphone is in range, they automatically connect to the smartphone.
Proceed as follows to pair the headphones with your device:
1. With the headphones switched on, press and hold the Bluetooth®
button (4) for at least 2 seconds until the LED indicator (5) starts
flashing quickly in blue. The headphones are now in pairing mode. In
pairing mode, you can connect a compatible Bluetooth® device to the
headphones.
42 - English