Music Playback Via Aux In - Silvercrest SKHO 40 A1 Bedienungsanleitung

Accepting/ending/rejecting a call
NOTE
► If you are listening to music and receive a call, you will hear
the ringtone in the headphones and playback is stopped. After
finishing the call, playback will be resumed automatically.
► You can accept/reject calls via the headphones or your smart-
phone. The sound is automatically played back through the
headphones.
Press 1 x briefly (for incoming call)
Press 1x briefly (during call)
Press and hold for approx. 2 seconds (for
incoming calls)

Music playback via AUX IN

You can use the supplied audio cable
to non-Bluetooth
the headphones behave like normal, cable-connected headphones
and can even be used with an empty battery. The Bluetooth
function is deactivated and the buttons on the
headphones do not function.
♦ Make sure that the headphones are switched off.
♦ Connect the audio cable
headphones.
♦ Connect the audio cable
phone jack) on the playback device.
♦ Switch on the playback device and set the volume to minimum.
♦ Put on the headphones as described in the section Wearing
the headphones.
♦ Set the desired volume on the playback device.
SKHO 40 A1
Button
-compatible playback devices. In AUX IN mode,
®
4
w
to connect the headphones
w
to the AUX IN socket
w
to the audio output (e.g. head-
Function
Accept call
End call
Reject call
®
7
of the
GB │ IE │
41 ■