Declaration Of Conformity - probst QUICKJET QJ-600-E Betriebsanleitung

Operating Instructions
QJ 600-E
Pos : 1.1 /02 Konformitätser kl ärung/Ü_Konfor mitäts er klär ung @ 0\mod10_2.doc x @ 5173 @ @ 1
2

Declaration of Conformity

Pos : 1.2 /02 Konformitätser kl ärung/Hers tell er @ 0\mod21_2.doc x @ 5355 @ @ 1
Declaration of conformity
Description:
Type:
Order-Nr.:
Manufacturer:
Complies with the following provisions applying to it
EC-machinery directive 2006/42/EG
Pos : 1.4 /02 Konformitätser kl ärung/Allgemein_EN 292 ers etz t durc h EN ISO 12100 @ 0\mod40_2.doc x @ 5201 @ @ 1
Applied harmonized standards in particular
DIN EN ISO 12100
Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
DIN EN ISO 13857
Safety of machinery ― Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO
13857:2008)
DIN EN 349 (ISO 13854)
Minimum distance to avoid squeezing any parts of the body
DIN 45625
Airborne noise measurement; enveloping surface-procedure; compressor including vacuum pump (displacement-,
turbo- and jet-compressors)..
DIN 45635-13
Measurement of airborne noise emitted by machines (displacement-, turbo- and jet-compressors).
DIN EN 1012-1 / DIN EN 1012-2
Compressors and vacuum pumps; Safety requirements part 1 and 2.
Pos : 1.9 /02 Konformitätser kl ärung/Vakuum_DIN 45635-13 @ 1\mod563_2.doc x @ 5425 @ @ 1
Pos : 1.12 /02 Konfor mitäts er klär ung/EL_EN 60204 ergenzt durch IEC 60204 @ 0\mod47_2.doc x @ 5243 @ @ 1
3 / 25
Declaration of Conformity
QUICKJET QJ-600-E Vacuum Lifting Device
QJ 600-E
52400033
Probst GmbH
Gottlieb-Daimler-Straße 6
D-71729 Erdmannhausen
info@probst-handling.de www.probst-handling.de
GB