Inhaltsverzeichnis
Werbung
16
UPDATE DER FIRMWARE
D Update vom PC
i7700
HF/50MHz TRANSCEIVER
Firm Utility
===CAUTION===
Updating the firmware is very risky. If you make a mistake, the IC-7700 may
not operate properly, and repair at Icom Inc.(Japan) may be the only way to
fix it.
You undertake the updating of the firmware at you own risk and responsibility,
Please refer to the firmware download homepage and/or the instruction manual
for the correct procedures in updating the firmware.
Also all preciously set conditions, the memory contents, etc will be lost when
making a firmware update.
Making a backup file of programmed contents and settings onto the
USB-Memory before updating is recommended.
Do you agree to all of the above?
Klicken, um
fortzufahren
IC-7700 Firm Utility
[...] klicken, um die Firmware-Datei zu wählen.
Firmware File Name
IC-7700 IP Address
Hier IP-Adresse des IC-7700 eingeben.
Turn the IC-7700 power ON.
When the normal operational screen appears, set the firmware file name
and IP address, then click [Start] button.
Updating the main CPU firmware first.
It will take approx. 1 minute.
DO NOT turn the IC-7700 power OFF until "Completed" dialog is displayed.
Depending on the updated contents, the sub CPU and/or DSP firmware will
automatically be updated when rebooting the IC-7700 and this will take
approx. 2 minutes. DO NOT turn the IC-7700 power OFF until the normal
operational screen appears, in such case.
Do you wish to start the firmware update?
Klicken, um das
Firmware-Update
zu starten.
Version 1.00
(C) 2007 Icom Inc.
q
w
e
r
t
y
u
i
Werbung
Inhaltsverzeichnis
