Mounting The Side Guiding Channels - Renson Fixscreen Minimal Montageanleitung

Fixscreen
3.2 • Mounting the side guiding channels
NOTE:
It is important to install the fixed profile with great care so as to enable the
further installation and smooth operation of the Fixscreen Minimal.
• Side guiding channel XS
The fixed profile of the side guiding channel can be attached to the structure either laterally or via
the rear wall. Please maintain a maximum distance of 450 mm between two attachment points.
There is a 35 mm mark to
facilitate lateral mounting.
10
There is a 10 mm mark to
facilitate mounting towards
the rear wall.
Minimal - Renovation IM 1
®
2,6 mm
The head height of the
screws should not exceed
2.5 mm; otherwise, the side
guiding channel will not
snap into place easily.
For mounting on the rear
wall, one may also drill
an optional hole with a
Ø 4.5 mm bore. These are
provided every 150 mm.
en
21