EINHELL TC-TS 2225 U Originalbetriebsanleitung Seite 84

soap. Do not use cleaning agents or solvents; these could attack
the plastic parts of the equipment. Ensure that no water can seep
into the device. The ingress of water into an electric tool increa-
ses the risk of an electric shock.
10.2 Carbon brushes
In case of excessive sparking, have the carbon brushes checked
only by a qualifi ed electrician.
Danger! The carbon brushes should not be replaced by anyone but
a qualifi ed electrician.
10.3 Maintenance
There are no parts inside the equipment which require additional
maintenance.
10.4 Ordering spare parts and accessories
Please provide the following information when ordering spare parts:
Type of unit
•
Article number of the unit
•
ID number of the unit
•
Spare part number of the required spare part
•
For our latest prices and information please go to
www.isc-gmbh.info
Tip! For good results we
recommend high-quality ac-
cessories from
www.kwb.eu
welcome@kwb.eu
10.5 Transport
Only ever transport the machine by lifting it by the
saw table. Never use the safety devices such as
the saw blade guard and stop rails for handling or
transporting purposes.
Anl_TC_TS_2225_U_SPK7_Rewe.indb 84
GB
!
- 84 -
24.03.2020 10:29:27