EINHELL TC-TS 2225 U Originalbetriebsanleitung Seite 67

33. Table width extension (left)
34. Table width extension (right)
35. Table length extension
36. Cap on saw blade guard
37. Additional leg
38. Wrench, size 10/13 mm
39. Wrench, size 10 mm
40. Fastening plate
41. Pointer (angular setting)
42. Scale (angular setting)
43. Knurled screw for cross stop
44. Adjustment screw (0°)
45. Adjustment screw (45°)
46. Hexagon screw
47. Washer, large
48. Lock bolt
49. Washer, small
50. Spring washer
51. Nut
52. Recessed head screw
53. Screw for hand wheel/crank
54. Screw with washer and spring washer
2.2 Items supplied
Please check that the article is complete as specifi ed in the scope
of delivery. If parts are missing, please contact our service center or
the sales outlet where you made your purchase at the latest within
5 working days after purchasing the product and upon presentation
of a valid bill of purchase. Also, refer to the warranty table in the ser-
vice information at the end of the operating instructions.
Open the packaging and take out the equipment with care.
•
Remove the packaging material and any packaging and/or trans-
•
portation braces (if available).
Check to see if all items are supplied.
•
Inspect the equipment and accessories for transport damage.
•
Anl_TC_TS_2225_U_SPK7_Rewe.indb 67
GB
- 67 -
24.03.2020 10:29:25