EINHELL TC-TS 2225 U Originalbetriebsanleitung Seite 70

when the equipment is used as prescribed it is still impossible to
eliminate certain residual risk factors.
The following hazards may arise in connection with the machine's
construction and design:
Contact with the saw blade in the uncovered saw zone.
•
Reaching into the running saw blade (cut injuries).
•
Kick-back of workpieces and parts of workpieces.
•
Saw blade fracturing.
•
Catapulting of faulty carbide tips from the saw blade.
•
Damage to hearing if essential ear-muffs are not used.
•
Harmful emissions of wood dust when used in closed rooms.
•
4. Technical data
AC motor ............................................................ 220-240V ~ 50Hz
Power P .............................................S1 1800 W · S6 25% 2200 W
Idling speed n
0
Carbide saw blade ..................................... Ø 254 x Ø 30 x 2.4 mm
Number of teeth .......................................................................... 48
Table size .................................................................580 x 555 mm
Table width extension left/right .................................580 x 150 mm
Table length extension, width ............................................ 555 mm
Support surface max. .............................................830 x 1055 mm
Cutting height max. ...................................................... 80 mm / 90°
................................................................................... 55 mm / 45°
Height adjustment ............................................... infi nite 0 - 80 mm
Tilting saw blade ..................................................... infi nite 0° - 45°
Cross stop angle .................................................. infi nite -45° - 45°
Extractor connection ........................................................Ø 36 mm
Weight ................................................................... approx. 26.5 kg
Protection class: ...................................................................... II/
Thickness of the splitter ..................................................... 2.0 mm
Anl_TC_TS_2225_U_SPK7_Rewe.indb 70
GB
................................................................ 4250 rpm
- 70 -
24.03.2020 10:29:25