PeakTech 2170 Bedienungsanleitung Seite 36

*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Downloaded from www.Manualslib.com
The measurement instrument is not to be to operated
unattended.
Always start with the highest measuring range when
measuring unknown values.
Do not subject the equipment to direct sunlight or extreme
temperatures, humidity or dampness.
Do not subject the equipment to shocks or strong
vibrations.
Keep hot soldering irons or guns away from the equipment.
Allow the equipment to stabilize at room temperature
before taking up measurement (important for exact
measurements).
Do not input values over the maximum range of each
measurement to avoid damages of the meter.
Replace the battery as soon as the battery indicator "BAT"
appears. With a low battery, the meter might produce false
reading that can lead to electric shock and personal injury.
Fetch out the battery when the meter will not be used for
long period.
Periodically wipe the cabinet with a damp cloth and mid
detergent. Do not use abrasives or solvents.
The meter is suitable for indoor use only
Do not operate the meter before the cabinet has been
closed and screwed safely as terminal can carry voltage.
Do not store the meter in a place of explosive, inflammable
substances.
Do not modify the equipment in any way
Do not place the equipment face-down on any table or
work bench to prevent damaging the controls at the front.
Opening the equipment and service – and repair work
must only be performed by qualified service personnel
-Measuring instruments don't belong to children
hands.-
manuals search engine
-35-