3. Remove the
top cover (side
4. Remove the
front
bezel.
5. Remove the
fan
assembly.
NOTE:
This step is valid for system configuration that is shipped with 80 W CPU.
6. Remove the
riser
card.
7. Remove the
hard-drive
About this task
The following images indicate the location of the solid-state drive and provide a visual representation of the removal procedure.
Steps
1. Remove the screw (M2x3.5) that secures the solid-state drive to the system board.
2. Slide and lift the solid-state drive off the system board.
Installing the M.2 2280 PCIe solid-state drive
Prerequisites
Wenn Sie eine Komponente austauschen, muss die vorhandene Komponente entfernt werden, bevor Sie das Installationsverfahren
durchführen.
About this task
The following image indicates the location of the solid-state drive and provides a visual representation of the installation procedure.
36
Ausbau und Wiedereinbau
bezel).
assembly.