Playing Two Sounds Together (Dual Play); Adjusting The Volume Balance In Dual Play (Dual Balance); Using Metronome; Sounding The Metronome - Roland HP101e Bedienungsanleitung

Playing Two Sounds
Together (Dual Play)
Simultaneously playing two tones when one key is
pressed is called "Dual play."
A0 B0 C1
1. Hold down the [Tone] button and press a key to
which a tone is assigned to select the fundamental
tone (p. 11).
2. Hold down the [Tone] button and press the [Met-
ronome] button.
Another tone (the Dual Tone) is played together with the
tone selected in Step 1.
3. To cancel Dual play, press the [Tone] button.
Changing the Dual Tones
1. Hold down the [Tone] and [Metronome] buttons,
and press either the "A0," "B0," or "C1" key.
Key Pressed
A0
B0
C1
The Dual Tone is changed.
I
Adjusting the Volume Balance in Dual Play
(Dual Balance)
You can change the volume balance between the two lay-
ered sounds in Dual play.
While holding down
these two buttons...
1. Hold down the [Tone] and [Metronome] buttons
and press the "C#" or "D#" key.
The volume balance changes.
Hold down the [Tone] and [Metronome] buttons and
press the "C#" key to lower the volume of the Dual Tone.
Dual Tone
Slow Strings
Strings
Choir
C# D#
Press
Holding down the [Tone] and [Metronome] buttons and
pressing the "D#" key raises the Dual Tone volume.
To restore the depth of the reverb effect at the time the
power is turned on, hold down the [Tone] and [Metro-
nome] buttons and press both the "C#" and "D#" keys
simultaneously.
You can change the Dual Balance by pressing any
"C#" or "D#" key.

Using Metronome

I

Sounding the Metronome

The HP101e features a built-in metronome.
1. Press the [Metronome] button, getting its indicator
to light.
The metronome will sound.
The beat is set to "weak beats only" when the power is
turned on. When the beat is set to "weak beats only,"
the [Metronome] button only flashes in green.
The button flashes in red and green in time with the beat
selected at that time. The button lights in red on the down-
beats, and in green on weak beats.
Stopping the metronome
2. Once again press the [Metronome] button, getting
the button to go dark.
The metronome will stop.
Chapter 2. Performance
13