Before You Start Playing; Connecting The Pedal Cable; Connecting The Power Cord; Opening/Closing The Lid - Roland HP101e Bedienungsanleitung

Before You Start Playing

Connecting the Pedal Cable

Connect the pedal cable to the Pedal jack on the
bottom panel of the instrument, at the rear.

Connecting the Power Cord

1. Insert the included power cord into the AC inlet
on the bottom panel of the instrument, at the rear.
2. Plug the power cord into a power outlet.
Be sure to use the supplied power cord.
NOTE

Opening/Closing the Lid

To open the lid, use both hands to lift it lightly,
and slide it away from yourself.
To close the lid, pull it gently toward yourself, and
lower it softly after it has been fully extended.
When opening and closing the lid, be careful not to let
NOTE
your fingers get caught. If small children will be using
the HP101e, adult supervision should be provided.
If you need to move the piano, make sure the lid is
NOTE
closed first to prevent accidents.

Setting Up the Music Rest

1. Insert the included music rest attachment screws
into the screw holes on top of the HP101e, and
tighten the screws slightly.
2. Put the music rest between the screws and the
HP101e's body.
3. While supporting the music rest with one hand,
secure it in place by turning the screws.
When attaching the music rest, support it firmly with one
hand to make sure that you don't drop it. Be careful, so
you don't get your fingers pinched.
4. To remove the music rest, support it with one
hand while loosening the screws.
After removing the music rest, don't forget to
NOTE
retighten the screws.
Do not apply excessive force to the installed music
NOTE
rest.
Be sure to use the supplied screws for attaching the
NOTE
music rest. Before moving the piano, be sure to remove
the music rest to prevent accidents.
Before You Start Playing
7