Programming Mode; Counting Modes - Baumer N 214 Betriebsanleitung

Differential counting
track A adding, track B
subtracting (A-B)
Any signal and duration
and time.
Up/down counting with
one counting track A and
external up/down signal
on track B
Totalizing tracks A and B
adding (A+B)
The operating mode and
consequent counting
direction is selected in the

programming mode.

Up/down counting with
two counting signals,
phase-offset by 90º
The counting direction is
automatically identiied
from the leading / lagging
90º phase-offset. The
internal phase discrimina-
tor performs the necessary
evaluation. Twofold or four-
fold evaluation is possible.
5.3 Counting modes (input modes)
The counter is able to count in either direction. The counting direc-
tion is independent of the adding or subtracting operating mode. The
exception to this is totalizing (A+B).
Track A
Track B
Counting
Track A
Track B
Counting
Track A
Track B
Counting Add.
Track A
Track B
Counting 4x
Counting 2x
Counting 1x
www.baumer.com
N 214
33