I9 Description Of Alarms - Electrolux LIBERO POINT NERLP2 Installations-Gebrauchs-Und Wartungs

I9 Description of alarms
THE DISPLAY
Control panel temperature exceeded.
Solution 1:
• Switch the appliance off with button "S";
• Leave the machine to
• Switch the hood on again with button "S";
• If the alarm status persists, go to Solution
2;
Solution 2 (fault unknown):
• Contact the After-Sales Service and
communicate the status of the alarm LED;
THE DISPLAY
Control card temperature exceeded.
Solution 1:
• Switch the appliance off with button "S";
• Leave the machine to
• Switch the hood on again with button "S";
• If the alarm status persists, go to Solution
2;
Solution 2 (fault unknown):
• Contact the After-Sales Service and
communicate the status of the alarm LED;
To recive recover instructions in electronic
format can visit the following website
http://www.electrolux-professional.it/index.asp?o=cs
Downloaded from www.Manualslib.com
FLASHING SYMBOLS
cool;
FLASHING SYMBOLS ON
cool;
Table 3 List of alarms
manuals search engine
ON
48