Bgeneral Instructions; B1 Introduction; B2 Defi Nitions - Electrolux LIBERO POINT NERLP2 Installations-Gebrauchs-Und Wartungs

RESIDUAL RISK
Crushing
Slipping or falling
Burns
Shearing of upper limbs
Electrocution
Falling from above
Tipping of loads
B GENERAL INSTRUCTIONS
B1 Introduction
This section describes the symbols used
(that mark and identify the type of warning)
and gives the defi nitions of terms used in the
manual, responsibilities and copyright.
B2 Defi nitions
Listed below are the defi nitions of the main
terms used in the Manual. Read them carefully
before making use of the Manual.
Operator:
machine
maintenance, cleaning, repair and transport
personnel.
Customer:
the person who purchased the machine and/
or who manages and uses it (e.g. company,
entrepreneur, fi rm).
Manufacturer:
Electrolux Professional SPA or any other
service centre
Professional SPA.
Operator for normal machine use:
an operator who has been informed and trained
Downloaded from www.Manualslib.com
DESCRIPTION OF HAZARDOUS SITUATION
Interference by third parties, use of inadequate lifting or carrying
equipment, wrong maneuvers.
The operator may slip due to the presence of water, dirt or
residuals of grease on the fl oor.
The operator deliberately or unintentionally touches some
components inside the machine without using gloves or fi rstly
allowing it to cool.
The operator intentionally or unintentionally puts fi ngers in a fan
that is on.
Contact with live parts during maintenance operations carried
out with the electrical panel powered. The operator intervenes
(with a power tool or without disconnecting the power to the
machine) lying down on the wet fl oor.
The operator works on the machine using unsuitable systems to
access the upper part (e.g. rung ladders, or climbs on it).
During maintenance on the machine or the packing containing
the machine with the use of unsuitable accessories or lifting
systems or with load unbalanced.
installation, adjustment,
authorised by
manuals search engine
Table 2 Residual risks
regarding the tasks and hazards involved in
normal machine use.
Technical
technician:
an operator
Manufacturer
professional and specifi c training, experience
and knowledge of the accident-prevention
regulations, is able to appraise the operations
to be carried out on the machine and recognize
and prevent any risks. His professionalism
covers the mechanical, electrotechnical and
electronics fi elds.
use,
Danger:
source of possible injury or harm to health.
Hazardous situation:
any situation where an operator is exposed to
one or more hazards.
Risk:
a combination of probabilities and risks of injury
or harm to health in a hazardous situation.
Electrolux
Protection devices:
safety measures consisting of the use of
specifi c technical means (guards and safety
devices) for protecting operators against
dangers.
35
assistance or specialized
instructed/trained
and who, based
by the
on his