A5 Residual Risks - Electrolux LIBERO POINT NERLP2 Installations-Gebrauchs-Und Wartungs

• Structural changes or modifi cations to the
operating logic;
• Tampering with the guards or safety
devices;
• Failure to use personal protection equipment
by operators, specialized technicians and
maintenance personnel;
• Failure to use suitable accessories (e.g. the
use of unsuitable tools, ladders, chairs, tables
for carrying out maintenance on equipment
placed inside or on top of the machine);
• Keeping combustible or fl ammable materials,
or in any case materials not compatible with
or pertinent to the work, near the machine;
• Incorrect machine installation (see the section
"F Installation and assembly");
• Placing in the machine objects not compatible
with its function or that can obstruct/damage
the machine, injure people or pollute the
environment;
• Placing objects (e.g. trays, ladles, etc.) over
the inlet of Zone A;
• Moving the machine without having switched it
off and disconnected it from the power supply,
winding the cable around the cable holder
accessory provided;
• Non-compliance with the requirements for
correct machine use;
• Placing the machine on fl oors that are not
perfectly fl at or with braking wheels not
blocked, or on structures that are not perfectly
stable.
• Other actions that give rise to risks not
eliminable by the Manufacturer;
Downloaded from www.Manualslib.com manuals search engine
A5 Residual risks
The machine has several risks that were not
completely eliminated from a design standpoint
or with the installation of adequate protection
devices.
Nevertheless, through
Manufacturer has taken steps to inform
operators of such risks, carefully indicating the
personal protection equipment to be used by
them.
Suffi cient spaces are provided for during the
machine installation phases to limit these
risks.
To preserve these conditions, corridors and
areas around the machine must always be:
• Kept free of obstacles (e.g. ladders, tools,
containers, etc.);
• Clean and dry;
• Well lit;
For the Customer's complete information, the
residual risks remaining on the machine are
given below: the actions described are deemed
improper and therefore strictly forbidden.
34
this manual the