Ageneral Safety Rules; A1 Introduction; A1.1 Protection Devices Installed On The Machine; A1.1.1 Guards - Electrolux LIBERO POINT NERLP2 Installations-Gebrauchs-Und Wartungs

A GENERAL SAFETY RULES
A1 Introduction
The machines are provided with electric and/
or mechanical safety devices for protecting
workers and the machine itself. Therefore the
operator must not remove or tamper with such
devices.
The Manufacturer declines any liability for
damage due to tampering or their non-use.
This appliance is not intended for use by
people (including
physical, sensory or mental abilities or without
experience and knowledge of it, unless they
are supervised or instructed in its use by a
person responsible for their safety.
A1.1 Protection devices installed on the
machine

A1.1.1 Guards

The guards on the machine are:
• Interlocked movable guards (panels on
customer side and operator side) for accessing
the compartment inside the machine;
• Door for accessing the machine's electrical
equipment, made from hinged panels
openable with tools. The door must not be
opened when the machine is be moved, if
there is equipment inside that is dangerous
when powered, pressurized or moving.
ATTENTION!
Several
manual show the machine, or
parts of it, without guards or with
guards removed. This is purely
for explanatory purposes. Do
not use the machine without the
guards or with the protection
devices deactivated.
A2 Ceased use
When the appliance is no longer to be used,
make it unusable by removing the power
supply wiring.
A3 Instructions for use and
maintenance
Risks mainly of a mechanical, thermal and
electrical nature are present in the machine.
Where possible
neutralized:
Downloaded from www.Manualslib.com
children) with
illustrations in
the risks have
manuals search engine
• Directly, by means of adequate design
solutions;
• Indirectly by using guards, protection and
safety devices;
During maintenance several risks remain, as
these could not be eliminated, and must be
neutralized by adopting specifi c measures and
precautions.
Do not carry out any checking, cleaning, repair
or maintenance operations on moving parts.
limited
Workers must be informed of this prohibition
by means of clearly visible signs.
Do not disconnect the appliance until the
cooking modules are switched off and no
longer active. In markets where usable, with
the use of "Fry Top" type appliances with
considerable thermal inertia, it is necessary
to ensure cooling before disconnecting
the power. For any doubts or for more
information, always refer to the instruction
manuals of the specifi c appliances.
To guarantee machine effi ciency and correct
operation, periodical maintenance must be
carried out according to the instructions given
in this manual.
In particular, make sure to periodically check
correct operation of all the safety devices and
the insulation of electrical cables, which must
be replaced if damaged.
ATTENTION!
Never
the
by
tampering with the guards or
protection and safety devices.
A4 Foreseeable improper use
Improper use is any use different from that
specifi ed in this manual. During machine
operation, other types of work or activities
considered improper and that in general can
involve risks for the safety of operators and
damage to the system are not allowed.
Foreseeable improper use includes:
• Failure to remove the power plug before
carrying out adjustment, cleaning reinstatement
and maintenance operations;
• Failure to turn the machine off by pressing
button "S" for about 2 seconds at the end of
the day;
been
33
operate the machine
removing, modifying or