Extended Settings Of Kvm-Over-Ip Connection; Limiting The Bandwidth; Classifying Ip Packets (Diffserv) - G&D DP-Vision-IP-Fiber-Serie Installation Und Bedienung

Establishing a KVM-over-IP™ connection for the first time
4. Enter the following data under
Host:
Control Port:
NOTE: In the
Detected devices
(computer modules and matrix switches).
Select the desired remote station and press
remote station.
5. Press F2 to save your settings.

Extended settings of KVM-over-IP connection

Limiting the bandwidth

By default, the KVM extender uses the maximum available bandwidth of a Gigabit
Ethernet. By means of manual bandwidth management you can adapt the transmis-
sion to different bandwidth requirements.
How to set a limit for the bandwidth of a KVM-over-IP connection:
1. Use the remote hotkey Ctrl+
2. Select the row
3. Under Bandwidth limit (Mb/s)
connection in Mb/s.
NOTE: Entering the value
4. Press F2 to save your settings.

Classifying IP packets (DiffServ)

For QoS purposes (Quality of Service) you have the possibility to use
Services Codepoints
Through this classification, you can prioritize the data packets, for example,
through a switch.
You can define a DSCP for the IP packets of the keyboard, mouse and control data
( data packets), as well as the IP packets of the video, audio and RS232
Communication
data ( data packets).
Data
21 · G&D DP-Vision-IP-Fiber
Remote
Enter the
Enter the number of the
computer module.
field, you can use the key combination
Host
dialog. This dialog shows you all unpaired remote stations
Num
KVM connection and press
you can set the bandwidth limit of a KVM-over-IP
0 deactivates the limit.
(DSCP) to classify the IP packets.
:
of the computer module.
IP address
Control Port
Enter to apply the IP address of the
to open the OSD of the computer module.
Enter .
configured in the
to open the
Ctrl+F8
Differentiated