Extended Settings Of Kvm-Over-Ip Connection; Limiting The Bandwidth; Classifying Ip Packets (Diffserv) - G&D DL-DVI-Vision-IP-Series Installation Und Bedienung

Establishing a KVM-over-IP™ connection for the first time

Extended settings of KVM-over-IP connection

Limiting the bandwidth

By default, the KVM extender uses the maximum available bandwidth of a Gigabit
Ethernet. By means of manual bandwidth management you can adapt the transmis-
sion to different bandwidth requirements.
How to set a limit for the bandwidth of a KVM-over-IP connection:
1. Use the remote hotkey Ctrl+
2. Select the row
3. Under Bandwidth limit (Mb/s)
connection in Mb/s.
NOTE: Entering the value
4. Press F2 to save your settings.

Classifying IP packets (DiffServ)

For QoS purposes (Quality of Service) you have the possibility to use
Services Codepoints
Through this classification, you can prioritize the data packets, for example,
through a switch.
You can define a DSCP for the IP packets of the keyboard, mouse and control data
( data packets), as well as the IP packets of the video, audio and RS232
Communication
data ( data packets).
Data
How to configure the DSCPs of the IP data packets:
1. Use the remote hotkey Ctrl+
2. Select the row
3. Enter the following data under
DiffServ Communication:
DiffServ Data:
4. Press to save your settings.
F2
17 · G&D DL-DVI-Vision-IP-Fiber
Num
KVM connection and press
you can set the bandwidth limit of a KVM-over-IP
0 deactivates the limit.
(DSCP) to classify the IP packets.
Num
and press
KVM connection
Network control
Define the
used for the classification of the IP packets of the
munication
Define the
used for the classification of the IP packets of the
data packets.
to open the OSD of the computer module.
Enter .
to open the OSD of the computer module.
.
Enter
:
Differentiated Services Codepoint
data packets.
Differentiated Services Codepoint
Differentiated
(DSCP) to be
Com-
(DSCP) to be
Data