EINHELL BT-SM 1800 Originalbetriebsanleitung Seite 50

The product meets the requirements of EN 61000-3-11 and is
•
subject to special connection conditions. This means that use of
the product at any freely selectable connection point is not allo-
wed.
Given unfavorable conditions in the power supply the product can
•
cause the voltage to fluctuate temporarily.
The product is intended solely for use at connection points that
•
a) do not exceed a maximum permitted mains system impedance
of Z sys = 0.25 + j0.15, or
b) have a continuous current-carrying capacity of the mains of at
least 100 A per phase.
As the user, you are required to ensure, in consultation with your
•
electric power company if necessary, that the connection point at
which you wish to operate the product meets one of the two requi-
rements, a) or b), named above.
Anl_BT_SM_1800_SPK7.indb 50 Anl_BT_SM_1800_SPK7.indb 50
GB
- 50 -
26.07.2018 07:46:52 26.07.2018 07:46:52