Technische Daten
Technische Daten
Umgebungsbedingungen
Bei Betrieb
Temperatur
Luftdruck
rel. Feuchte
Bei Lagerung
Temperatur
Luftdruck
rel. Feuchte
Funktionsprinzip
Steuerprinzip
Einstellwerte
Beatmungsfrequenz
1)
I:E-Verhältnis
Inspirationsflow
Hubvolumen
mit Faltenbalg K
2)
für Säuglinge und
Kleinkinder
mit Faltenbalg E
für Erwachsene und
Kinder
Minutenvolumen
(nach ISO)
Frischgasflow
PEEP
1)
Die Steuerelemente für die Beatmungsfrequenz sind mit Druckluft kalibriert.
Bei Verwendung von Sauerstoff als Antriebsgas ergibt sich eine Reduzierung
der Frequenz um ca. 10%.
2)
Aus dem Rüstsatz "Kinderbalg"(Option).
15 bis 35 °C
700 bis 1060 hPa
20 bis 80%
–10 bis 60 °C
500 bis 1060 hPa
0 bis 80%
Bellows in Bottle
(Balggerät mit Primär/
Sekundär-System)
pneumatisch, zeitgesteuert,
volumenkonstant
6 bis 60/min
± 15%
1:1, 1:2, 1:3
± 20%
20 bis 80 L/min
± 15% bei 20 mbar
Gegendruck
50 bis 150 mL
100 bis 1600 mL
25 L/min bei 4 L/min Frisch-
gasflow und I:E=1:2
2 bis 8 L/min
ca. 1 bis >15 mbar
Technical Data
Technical Data
Ambient conditions
During operation
Temperature
Atmospheric pressure
Rel. humidity
During storage
Temperature
Atmospheric pressure
Rel. humidity
Functioning principle
Control method
Set values
Ventilation frequency
1)
I:E ratio
Inspiratory flow
Stroke volume
with bellows K
2)
for neonates and
infants
with bellows E
for adults and
children
Minute volume
(according to ISO)
Fresh gas flow
PEEP
1)
The control elements for ventilation frequency have been calibrated with
medical air.
When oxygen is used as drive gas, there is a reduction in frequency of
about 10%.
2)
From "Infant bellows" modification kit (Option).
15 to 35 °C
700 to 1060 hPa
20 to 80%
–10 to 60 °C
500 to 1060 hPa
0 to 80%
Bellows in Bottle
(bellows with primary/
secondary system)
pneumatic, time-cycled,
volume-constant
6 to 60/min
± 15%
1:1, 1:2, 1:3
± 20%
20 to 80 L/min
± 15% at 20 mbar
counterpressure
50 to 150 mL
100 to 1600 mL
25 L/min at 4 L/min fresh
gas flow and I:E=1:2
2 to 8 L/min
approx. 1 to >15 mbar
27