• Do not bring the system outer foil into contact with
hard objects.
Doing so may damage the blades as they are very
thin and deform easily.
• Do not dry the main unit with a dryer or a fan heater.
Doing so may cause malfunction or deformation of the
parts.
• Do not leave the shaver exposed to direct sunlight
with the foil frame detached.
Doing so may deteriorate the waterproof rubber and
degrade waterproof function, which may cause to
malfunction.
• Store the shaver in a place with low humidity after
use.
Failure to do so may cause malfunction due to
condensation or rust.
• Do not leave the detergent in location of high
temperatures.
Doing so may cause deterioration.
• Keep both the inner blades inserted. If only one of the
inner blades is inserted, the shaver may be damaged.
• If you clean the shaver with water, do not use salt
water or hot water. Do not soak the shaver in water for
a long period of time.
Parts identification
A Main body
1 Protective cap
2 System outer foil
3 Foil frame
ES-LV97_EU.indb
13
B Self-cleaning
4 Foil frame release
buttons
5 Power switch
6 Lamp display
a. Shaving sensor
lamp ( )
C AC adaptor (RE7-87)
b. Battery capacity
lamp
c. Switch lock lamp
( )
d. Charge status
Accessories
lamp ( )
D Travel case
7 Appliance socket
E Cleaning brush
8 Outer foil section
F Oil
9 System outer foil
G Special detergent
release buttons
Inner blades
H Operating Instructions
Trimmer
I Guarantee Card
Trimmer handle
Main body rear
terminals
recharger (RC9-22)
Charging terminals
Cleaning liquid unit
removal button
Intake port
Self‑cleaning
recharger socket
Lock release lever
Cleaning liquid filter
Cleaning liquid unit
STATUS lamp
LOW lamp
CLEAN lamp
DRY lamp
SELECT button
Adaptor
Power plug
Cord
Appliance plug
(Detergent)
There may be water
droplets inside the
self‑cleaning recharger
at the time of purchase,
but there is no problem
regarding the hygiene or
the performance. (It is a
residue of the distilled
water used for
performance test.)
13
2019/06/05
21:17:18