Parts Identification; Preparation; Charging The Shaver - Panasonic ES‑CV51 Betriebsanleitung

Parts identifi cation
A Main body
1 Protective cap
2 System outer foil
3 Foil frame
4 Smooth rollers
• They help to glide over
the skin more easily.
5 Foil frame release
buttons
6 Power switch
7 Lamp display
a. Shaving sensor lamp
( )
b. Battery capacity
lamp
c. Switch lock lamp (
d. Charge status lamp
( )
8 Appliance socket
9 Outer foil section
: System outer foil
release buttons
; Inner blades
< Trimmer
= Trimmer handle
12
ES-CV51_EU.indb 12
 B AC adaptor (RE7-87)
> Adaptor
? Power plug
@ Cord
A Appliance plug
Accessories
C Travel case
D Cleaning brush
E Oil
F Operating Instructions
G Guarantee Card
)

Preparation

Charging the shaver

• Turn the shaver off.
• Wipe off any water droplets on the appliance socket.
1
Insert the appliance plug
[BA] into the shaver�
2
Plug the adaptor [B>] into a
household outlet�
• Check that the charge status lamp
( ) is glowing.
• Charging is completed after
approx. 1 hour.
3
Disconnect the adaptor after charging is completed�
Note
You cannot operate the shaver while charging.
While charging
The charge status lamp ( )
glows.
The battery capacity lamp
will blink in order of "LOW",
"MID", and "HIGH" while the
charging progresses.
2
1
After charging is completed
The battery capacity lamp
and the charge status lamp
( ) will light up and then
turn off after 5 seconds.
2017/08/04 19:57:10