Parts Identification; Preparation; Charging The Shaver - Panasonic ES-LV6U Betriebsanleitung

Parts identification

A Main body
1 Protective cap
2 System outer foil
3 Foil frame
4 Smooth rollers
• They help to glide
over the skin more
easily.
5 Foil frame release
buttons
6 Power switch
7 Lamp display
a. Shaving sensor
lamp ( )
b. Battery capacity
lamp
c. Switch lock lamp
( )

Preparation

Charging the shaver

• Turn the shaver off.
• Wipe off any water droplets on the appliance socket.
ES-LV6U_EU.indb 13
d. Charge status
lamp ( )
 Appliance socket
 Outer foil section
 System outer foil
release buttons
 Inner blades
 Trimmer
 Trimmer handle
B AC adaptor (RE7-87)
 Adaptor
 Power plug
 Cord
 Appliance plug
Accessories
C Travel case
D Oil
E Operating Instructions
F Guarantee Card
1
Insert the appliance plug
[B] into the shaver�
2
Plug the adaptor [B] into
a household outlet�
• Check that the charge status
lamp ( ) is glowing.
• Charging is completed after
approx. 1 hour.
3
Disconnect the adaptor
after charging is completed�
Note
You cannot operate the shaver while charging.
Quick charge
Even though the battery runs out, you can shave
once after 3‑minute charge.
(This will differ depending on usage.)
While charging
glows.
The number of the battery
capacity lamp will increase
as charging progresses.
2
1
After charging is completed
All the battery capacity lamp
and will glow and then
turn off after 5 seconds.
13
2021/12/07 21:15:24