Replacing The Cleaning Liquid - Panasonic ES‑LV97 Betriebsanleitung

►Replacing the inner blades
1. Remove the inner blades [A] one at a
time.
2. Insert the inner blades one at a time.
Note
Do not throw away the foil frame.

Replacing the cleaning liquid

If the STATUS lamp glows for 5 seconds when the
SELECT button is pressed, the cleaning liquid needs to
be replaced.
• Even if the STATUS lamp does not light up, replace
the cleaning liquid after 6 months have passed.
1
Remove the AC adaptor [C]
and remove the cleaning liquid
unit [B]� (See page 15�)
2
Wash away the old cleaning liquid.
• It can be drained as sewage.
3
Rinse the cleaning liquid unit�
• Pour water as illustrated while tilting the
cleaning liquid unit and shaking it gently.
22
ES-LV97_EU.indb 22
• You can clean with the cleaning liquid filter
removed.
After washing, be sure to attach the cleaning liquid
filter.
4
Gently wipe off any beard
trimmings attached to the
inside of the cleaning tray
(a) with a cloth or tissue
paper dampened with water�
• Clean the corners and uneven
parts of the cleaning tray with a
cotton swab dampened with water.
5
Prepare the new cleaning liquid�
(See page 15�)
Notes
• The cleaning liquid will decrease every time it is used,
but do not add detergent and water except when
replacing the cleaning liquid.
Doing so may deteriorate the cleaning function.
• Do not wash the self‑cleaning recharger unit with water.
1
• Do not wipe with thinners, benzine, alcohol etc.
Doing so may cause malfunction, or cracking or
discoloration of the parts.
Wipe with diluted soapy water.
• Some cleaning liquid components and skin oil may
separate and adhere to the cleaning liquid unit and
cleaning liquid filter. This does not indicate a problem.

2019/06/05 21:17:24