Hartan Two Select Bedienungsanleitung Seite 9

1. The handle is designed for
carrying the carrycot.
Make sure the carrying handle
is securely latched in the
carrying position.
To fold the bar back, depress
the two red safety buttons and
place the bar back, which
can be done in several
steps.
2. The inner lining of the
carrycot can be removed
and washed (see „Care and
maintenance").
3. The carry cot underlining can
be washed (follow the care
and maintenance
instructions). To remove it,
open the zip fastener.
4. The carrycot can be folded
together. To do this, tip the

four clamp clips inward.
To unfold the carrycot,

press the clamp clips
outward until they are
engaged.
5. You may open the hood flap
to prevent heat from
accumulating.
14
Function of the carrycot
Safety button
Unfolding
Folding

To open the hood flap
All the materials we use can easily be cared for.
Care of the fabric parts
Clean soiled fabrics when dry using a clothes­brush or lukewarm water (then use hair dryer). Do not rub
fabrics extensively. Remove tenacious stains using a soft detergent. All removable fabric parts may be
machine washed in lukewarm water at a gentle setting and reduced agitation, at 30 °C. Let's say you have
encountered a heavy rain shower. Dry your carriage with the hood still on in a dry and airy room using a cloth.
This prevents marking as well as the underlining fabrics from moist soaking in through the seams. As a
guaranteed protection against rain, we recommend that you use our rain cover, which is either included or can
be purchased at your dealer's. Our fabrics have quite a number of distinctive features. However, they are very
sensitive to excessive sunlight. That's why you should park your carriage in the shade whenever possible.
Care of the chassis
The chassis requires regular care. You should clean and slightly lubricate the wheel axles at a regular 4­weeks
interval. Before oiling the wheels and push­in axles, make sure these are absolutely clean and free of sand
etc., in order not to compromise the proper working of the locking mechanism. Use a silicone based lubricant
spray for all moving plastic parts to maintain them in an operative condition. Keep all coated and chrome­
plated metal parts in dry condition, and use a finish restorer or chrome paste if necessary. Remove smaller
chassis paint damages by means of a touch­up applicator.
Do not use high-pressure cleaners when cleaning your carriage, due to risk of damaging the ball
bearings of the wheels (greased) and other functional parts (grinding and creaking noise).
Wheels: Overpressure may result in accidents and personal injuries. Replace worn plain wheel bearings and
springs in time. Replace worn plain wheel bearings and springs in time. Little stones in the thread, etc. may
just as well damage the floor covering. When parking the carriage in the blazing sun or cramming it in the boot
at temperatures of above 40°C, the semi pneumatic tires may flatten or become deformed.
For pneumatic tires
When using pneumatic wheels, make sure they have got enough air in the tire. Specified tire inflation pressure
should be between 1.2 and 1.5bar max.
WARNING!
Max. tire pressure will be reached quickly. Tires tend to lose air over time. When blowing up
a flat tire, inflate it only halfway first, and make sure the tire is evenly seated, to avoid "wobble". Replace worn
plain wheel bearings and springs in time. Then continue to inflate it to the proper pressure.
2 YEARS warranty
This product is guaranteed for a period of 2 years by your contract partner. For possible submission of proof,
please keep your receipt, the completed warranty card as well as the hand­over check bearing your signature
for the length of the warranty period. These documents must be submitted to qualify for service under the
warranty.
IN CASE OF WARRANTY CLAIm
This product is warranted against defects in materials and workmanship that existed at the time it was handed
over.
THIS WARRANTY DOES NOT COVER ......
We disclaim liability for defects in the object of purchase that are beyond our control.
This especially applies to:
n natural wear and tear (wear­related defects) and defects due to excessive stress
n consequential defects, originally caused by neglect of defects/damagesbut developing into conditions
necessitating a more difficult repair
n defects due to improper or inappropriate use (see Instructions)
n defects due to incorrect assembly or operation
n defects due to negligent handling or lack of maintenance of the product
n defects due to improper alteration of the product.
Checking and care instructions
Quality agreement
15