Removing The Cps And The Battery Box From The Pallet - Gtec CPS 6 Handbuch

R CPS
EMOVING THE
WARNING: IN ORDER TO AVOID DAMAGE TO PERSONS AND/OR TO THE MACHINES, PLEASE
FOLLOW SCRUPULOUSLY THE INDICATIONS GIVEN BELOW.
SOME OF THE FOLLOWING OPERATIONS REQUIRE TWO PEOPLE.
▪
Cut the straps and slide the cardboard box off
the unit pulling upwards.
packaging.
▪
Remove the box containing the accessories.
NOTE: The box of accessories may be inside
the packaging or behind the CPS door.
▪ Once removed, the two brackets can be used as ramps. Fasten the ramps to the pallet using the screws A and
making sure to align them with the wheels of the unit.
▪
Turn the feet as far as they will go in order to increase the distance between the unit and the pallet.
▪
Make sure that the door is properly closed.
▪
WARNING: to unload the CPS from the pallet, we recommend that you push it down the ramps from behind,
taking every precaution and accompanying the unit along the ramps to the floor. In view of the weight of the
machine, this operation should be carried out by two people.
NOTE: We advise you to keep all the parts of the packaging for future use.
B
AND THE ATTERY
Remove the
B P
OX FROM THE ALLET
▪
Remove the two brackets securing the CPS to the pallet by
loosening screws A and B.
- 71 -