Battery Box ( Optional ); Separate Bypass Input - Gtec CPS 6 Handbuch

B B (
ATTERY OX
THE BATTERY BOX IS AN OPTIONAL ACCESSORY.
The Battery Box contains batteries that increase the operating time of the CPS during prolonged black-outs. The number
of batteries contained in it will vary according to the type of CPS to which the Battery Box is to be installed. The utmost
attention must be paid to ensure that the battery voltage of the Battery Box corresponds to that supported by the CPS.
Additional Battery Boxes may be connected in a chain to obtain the desired autonomy time during a power failure.
This series of Battery Box contains two separate strings of batteries, one with a positive voltage and the other with a
negative voltage with respect to the neutral terminal (N).
The basic diagram for the Battery Box is shown here below.
Rated voltage
Weight
W x D x H
S B
EPARATE YPASS
OUR CPS ARE EQUIPPED WITH "DUAL INPUT" AS STANDARD ON ALL MODELS, SO THAT THE BYPASS LINE
IS SEPARATE FROM THE INPUT LINE.
This feature allows for separate connections between the input line and bypass line.
The CPS output is synchronised with the bypass line to prevent incorrect switching between counterphase voltages in
the event the automatic
)
OPTIONAL
BBX 1320 480V
BB NP T4 3F
240 + 240 Vdc
300 Kg
I
NPUT
bypass is activated
BBX 1320 480V
BB NP T2 3F
240 + 240 Vdc
390 Kg
400 x 815 x 1320 mm
or the manual
- 67 -
BBX 1320 480V
BB NP T5 3F
240 + 240 Vdc
400 Kg
bypass (SWMB) is closed.