Pkm WA 8.5-E1614 Bedienungsanleitung Seite 87

1. Connection of the hoses are not
watertight.
2. Drain pump / drain pump filter is
blocked.
3. Water drain hose is dirty.
1. No energy supply.
2. Circuit board damaged.
3. Wiring harness damaged.
1. Accumulated, damp detergent.
1. Heavily-contaminated laundry.
2. Wrong amount of detergent.
1. The shipping bolts are still in the
appliance.
2. The appliance is not installed and /
or adjusted properly.
3. Foreign objects are in the appliance.
4. Load is too low.
5. The laundry has accumulated at one
side of the drum.
6. Laundry which cannot be spaced is
in the drum.
If the appliance has a malfunction not noted on the schedule above or if you
have checked all items on the above schedule but the problem still exists, please
contact the aftersales service.
Downloaded from www.Manualslib.com
Indicators / Display do not work.
Some detergent left in the container.
Unsatisfactory washing results.
Abnormal noise / Severe vibrations
manuals search engine
Water leakage.
1. Check the hoses.
2. Check the drain pump / drain pump
filter.
3. Clean the water drain hose.
1. Check the energy supply.
2. Please contact your aftersales
service.
3. Check the wiring harness (please
contact your aftersales service if
necessary).
1. Clean the container.
 Use liquid detergents.
 Use detergents suitable for washers
only.
1. Select a suitable programme.
2. Choose the proper amount of
detergent (look at the information
on the packaging of your detergent).
1. Remove the shipping bolts.
2. Install and / or adjust the appliance
properly.
3. Remove any foreign objects.
4. Load the appliance properly.
5. Space the laundry.
6. Remove the pieces which cannot be
spaced.
87