Pkm WA 8.5-E1614 Bedienungsanleitung Seite 58

 Ensure that the rubber washer is in the valve
connector.
 Attach the water inlet hose to the inlet valve
of the washing machine and to the
appropriate water connection (s. fig. on the
right).
 Tighten the water inlet hose firmly to avoid
leakage.
 The model for the cold and hot water connection is equipped with two inlet
valves.
 The inlet valve for the hot water connection as well as the water inlet hose have
a red marking.
A
B
C
D
 Ensure that the rubber washer is in the valve connector.
 Attach the water inlet hoses (colt / hot) to the appropriate inlet valves (s. fig.
above) and to the appropriate water connections (cold water supply / hot water
supply).
 Tighten the water inlet hoses firmly to avoid leakage.
Downloaded from www.Manualslib.com
Hot water connection (depending on model):
Inlet valve for cold water
Water inlet hose for cold water
Inlet valve for hot water (incl. red marking))
Water inlet hose for hot water (incl. red marking)
manuals search engine
Cold water supply:
Washing machine:
58