Flush Switches; Setting The Clock; Switching On The Oven - hanseatic N5M90E2-E11G400 Gebrauchsanleitung

Page GB-10 Operation

Flush switches

Push in the switches to protect against inad-
vertent operation.
• Lightly press on the switch to push it in/
out.

Setting the clock

When using for the first time and after a pow-
er cut, you must set the clock otherwise the
oven will not operate. The time "0:00" is dis-
played. The colon does not blink.
(18) (12)
1. Press the button (18). The hour indica-
tor of the clock blinks.
2. Set the hour(s) using the rotary switch (14).
3. Press the button (18). The minute indi-
cator of the clock blinks.
4. Set the minute(s) using the rotary
switch (14).
5. Press the button (18) again. The colon
on the time indicator begins to blink. The
time is set.
To learn how to use the timer, read
from page GB-15.
The clock is hidden in energy-saving mode
(see page GB-14). The clock still remains set.

Switching on the oven

1. You can select the heating method using
the function switch (22). The selected
heating method is shown as a symbol on
the operating display (10).
(14)
*) This cooking function is used to determine the le-
vel of energy consumption in conventional mode.
**) This cooking function is used to determine the
level of energy consumption in convection mode
and to determine the energy efficiency class.
(10) (22)
Oven lamp
Defrosting
Bottom heat
Temperature 60–120 °C
Top and bottom heat
Temperature 50–250 °C
Convection (top and bottom heat
with fan)
Temperature 50–250 °C
Grill
Temperature 180–240 °C
Intensive grill (grill with top heat)
Temperature 180–240 °C
Intensive grill with convection
Temperature 180–240 °C
Hot air (ring heater with fan)
Temperature 50–240 °C
ECO mode, for energy-efficient
cooking**)