Replacing Oven Lamp Bulbs - hanseatic N5M90E2-E11G400 Gebrauchsanleitung

8. Make sure that both rubber holders (28)
are positioned correctly.
9. Slide the upper pane back into the hold-
er above the door handle. Make sure
that the rubber pads (27) are positioned
correctly.
10. Press both latches (26) shut. They latch
into place with a clear "click".
11. Replace the oven door (see „Replacing
the oven door on its hinges" on page
GB-20).

Replacing oven lamp bulbs

For oven lamp, you need heat-resistant oven
lamp: 230 V~, 25 W, G9, T 300 °C.
WARNING
Risk of electric shock!
Improper replacing of the oven lamp
bulb may cause electric shock which
can lead to serious injury or even death.
Before replacing the oven bulb, be
■
sure to switch off the circuit breaker
or unscrew fuses.
Risk of burns!
The cooking compartment can re-
main hot a long time after it has been
switched off. As a result, there is a risk
of being burnt when touching the cook-
ing compartment walls or heating unit.
Cleaning the oven
Only change the oven lamp bulb
■
when the oven has cooled off com-
pletely.
1. Switch off the circuit breakers or unscrew
fuses.
2. Place a soft cloth in the cooled cooking
compartment in the event that the glass
cover falls or the bulb falls off.
3. Unscrew the glass cover anticlockwise
and remove it.
4. Carefully pull the defective bulb out of the
socket and replace it with a new one of
the same type.
5. Insert the glass cover back into the open-
ing and screw it back on clockwise.
6. Remove the cloth from the cooking com-
partment and switch it on again.
7. Set the clock.
Page GB-21