Safety Precautions; Markings And Symbols - SATO TG3 Serie Schnellanleitung

Safety Precautions

In this section, safety precautions about printer operation are explained to ensure proper care and usage.
Make sure to read these carefully before using your printer.

Markings and Symbols

The following symbols or markings are used in this manual and on the printer so that you can properly use the
printer, and to prevent any damage to property, harm or injury to yourself and others.
Make sure to read their explanations carefully to familiarize yourself with their meanings.
This symbol indicates information that, if ignored or applied incorrectly, creates the danger of
WARNING
death or serious personal injury.
This symbol indicates information that, if ignored or applied incorrectly, creates the possibility
CAUTION
of personal injury or property damage.
Symbol examples
The triangle indicates something you should take absolute care with. The cautions are indicated
concretely within the symbol. The symbol on the left indicates a risk of electric shock.
A circle with a diagonal line
that you should not try to take the unit apart.
A black circle with a picture inside
that you should unplug the unit from the wall outlet.
Place the printer on a surface that is flat and level
Do not leave the printer on unstable surfaces. If the printer falls and hits someone, it could cause
injury.
Do not expose the printer to liquids or moisture
Do not place objects filled with liquids, such as beverages, vases, or chemical product near the
printer. Also, do not place small metal objects near the printer. If the liquids have been spilled or
objects have fallen into the printer, turn off the power immediately, disconnect the power cord from
the power outlet, and contact your nearest dealer, service center or the store where you purchased
the printer. Continue use of the printer in this condition may cause fire or electric shock.
Do not insert foreign material into the printer
Do not insert or drop any metal objects or flammable objects into the openings (cable end). If the
foreign material has fallen into the printer, turn off the power immediately, disconnect the power cord
from the power outlet, and contact your nearest dealer or service center or the store where you
purchased the printer. Continue use of the printer in this condition may cause fire or electric shock.
4
indicates something you should not do. The symbol on the left indicates
indicates something you need to do. The symbol on the left indicates
WARNING