Setting Labels - SATO TG3 Serie Schnellanleitung

Setting Labels

Setting Roll Paper
1 Open the cover.
2 If the inner diameter of the roll is 100 mm, attach
the boss at the roll paper supply spindle. If the
inner diameter of the roll is 75 mm, proceed to
Step 4.
3 Using the boss attachment positions given in the
following table as a guide, attach the boss and
then fasten it in place with the screw.
Boss attachment position
Attachment hole 1, 2
Attachment hole 2, 3
Attachment hole 3
Boss
Roll paper supply spindle
14
Paper width
Up to 40 mm
Up to 50 mm
50 mm to 80 mm
3 2 1