Cookware Dimensions; Using The Induction Hob; Starting Cooking - KKT KOLBE CC9001IND Benutzerhandbuch

Right cookware / Using the induction hob

5.1 Cookware dimensions

The ideal base diameter of the cookware corresponds to the size
of the cooking zone on which it is placed.
The cooking zones automatically adapt to the diameter of the
cookware up to a certain limit.
However, the bottom of this cookware must have a minimum
dimension corresponding to the respective cooking zone. (See
table)
In order to ensure the best efficiency and perfect function, please
place your cookware in the middle of the zone if possible.
Cooking zone
1,2
3
4
Flex-Zone

6. Using the induction hob

6.1 Starting cooking

1. Touch the ON/OFF control
After power on, the buzzer beeps once, timer control
shows „00", heating zone selection controls show
„ ", or „ ", or „
hob has entered the state of standby mode.
2. Place suitable cookware on the cooking zone that you
wish to use.
Make sure the bottom of the cookware and the surface
of the cooking zone are clean and dry.
Minimum (mm)
140
220
120
220
.
", indicating that the induction
Maximum (mm)
220
300
160
220x400
55