Troubleshooting - KKT KOLBE CC9001IND Benutzerhandbuch

Troubleshooting

What?
Spillovers on the
touch controls
12. Troubleshooting
Problem
F1-F6
F9-FA
FC
E1/E2
E3/E4
E5
66
How?
1. Switch the power to the
cooktop off.
2. Soak up the spill
3. Wipe the touch control area
with a clean damp sponge or
cloth.
4. Wipe the area completely
dry with a paper towel.
5. Switch the power to the
cooktop back on.
Possible causes
Temperature sensor
failure.
Temperature sensor of
the IGBT failure.
The connection between
the display board and
the main board is fail.
Abnormal supply voltage
Temperature sensor of
the ceramic glass plate
Is high
Temperature sensor of
the IGBT is high
Important!
• The cooktop may beep and
turn itself off, and the touch
controls may not function while
there is liquid on them. Make
sure you wipe the touch control
area dry before turning the
cooktop back on.
What to do
Make sure the cooktop is connected
to the power supply and that it is
switched on.
Check whether there is a power
outage in your home or area. If
you've checked everything and the
problem persists, call a qualified
technician.
Unlock the controls. See section
'Using your ceramic cooktop' for
instructions.
Make sure the touch control area is
dry and use the ball of your finger
when touching the controls.
Use cookware with flat and smooth
bases. See 'Choosing the right
cookware'.
See 'Care and cleaning'.
This is normal for cookware and
does not indicate a fault.
Please restart after the
induction hob cools down.