When You Have Finished Cooking; The Booster Function - KKT KOLBE CC9001IND Benutzerhandbuch

Using the induction hob

6.2 When you have finished cooking

1. Touch the heating zone selection control that you wish
to switch off:
2. Turn the cooking zone off by pushing the slider
to the left. Make sure the display shows"0"
3. Turn the whole cooktop off by touching the
ON/OFF control .
4. Beware of hot surfaces
If a cooking zone is still too hot to touch after use and there is
a risk of injury, this is indicated by an „H".
It will disappear when the surface has cooled down to a safe
temperature.
This can also be used as an energy-saving function, if you
want to heat further pans: Just use the zone, which is still hot.

6.3 The booster function

The booster function is used to maximize the power
of a zone for a certain time.
Activating the booster function
1. Touch the selection control for the desired cooking zone.
2. Touch the boost control button.
The zone indicator will display „b". The power setting will be maximized.
Cancel the boost function
At first, touch the selection control of the desired zone. Then touch
the boost control again or pull the slider to your target power.
57