Electromagnetic Compatibility (Emc) - Philips EnergyUp HF3430 Bedienungsanleitung

ENGLISH
10
Caution
- Allow the device to acclimate to the prescribed operating conditions
before using it after storage or transport. Guideline is one hour per 10°C
temperature difference. For cold to warm transition, be sure that adapter
and appliance are dry (non-condensing) before operating.
- Do not use the appliance outdoors or near heated surfaces or heat
sources.
- This appliance contains an internal rechargeable lithium-ion battery pack.
Do not incinerate, disassemble or expose to high temperatures above
50°C (122°F). Do not operate or charge the appliance at temperatures
below 5°C (4°F) or above 35°C (95°F). Batteries can overheat, causing
fire or bursting.
- Use the appliance in vertical position with the stand in place. Do not use
it in horizontal position without the stand or cover it, as this might cause
the appliance to overheat.
- Do not place heavy objects on the appliance, the adapter or the cord.
- Do not use the adapter in or near wall sockets that contain or have
contained an electric air freshener to prevent irreparable damage to the
adapter.
- When you remove the adapter from the wall socket, do not pull at the
cord but grasp the adapter directly to avoid cord damage.
- When you remove the small plug from the appliance socket, do not pull
at the cord but grasp the small plug directly to avoid cord damage.
- The appliance has no on/off switch. To disconnect the appliance, remove
the plug from the wall socket. The adapter must remain easily accessible
at all times.
Safety and compliance
- This Philips appliance complies with all applicable standards and
regulations regarding exposure to electromagnetic fields.
- This is a Class IIa medical appliance. It meets the requirements of Medical
Device Directive MDD 93/42/EEC and 2007/47/EC for medical
appliances.
- This is not a general illumination product.

Electromagnetic compatibility (EMC)

Portable and mobile radio frequency communication equipment, such as
mobile phones, cordless telephones and their base stations, walkie-talkies, and
wireless home network devices (routers), can affect the Philips EnergyUp.