Philips EnergyUp HF3430 Bedienungsanleitung Seite 9

They must therefore not be used in close proximity to the EnergyUp.
If this cannot be avoided, the EnergyUp must be observed to verify normal
operation. If abnormal performance (e.g. loss of functionality, light inconsistency,
flicker) is observed, additional measures may be necessary, such as re-
orientation of the radio frequency communication equipment or the EnergyUp
(see section 'EMC information' in chapter 'Specifications' for more details).
General
The adapter is equipped with an automatic voltage selector and is
suitable for mains voltages ranging from 100 to 240 Vac, 50/60 Hz.
Charging
To operate the appliance corded, connect it to a wall socket. For more
flexibility, charge the rechargeable battery. Charging takes approximately
3 to 4 hours.
Note: The charging time is longer when you use the appliance while it is
charging.
1 Fold out the stand and place the appliance on a table (Fig. 2).
2 Insert the small plug into socket on the appliance (Fig. 3).
3 Put the adapter in the wall socket.
The charge indicator pulsates green during charging. When the
,
battery is fully charged, the charge indicator turns solid green.
It continues to light up solid green for 1 hour (Fig. 4).
Note: When the battery is fully charged, it contains enough energy for about
1 hour of use at full intensity.
Using the EnergyUp
When to use
Knowing at what time to use the Philips EnergyUp is essential. It may
mean the difference between feeling better in a few days instead of
weeks and between experiencing benefits or experiencing none. Follow
these guidelines to understand how light affects us and when to use the
Philips EnergyUp for the best results.
ENGLISH
11