Storage Conditions; Physical Characteristics; Emc Information - Philips goLITE BLU HF3331 Bedienungsanleitung

Storage conditions

Temperature
Relative humidity

Physical characteristics

Dimensions
Weight
Peak wavelength
Half-peak bandwidth
Typical irradiance (100% intensity)
Circuit diagrams, component part lists and other technical descriptions are available on request.
As user of this appliance, you should take measures to prevent the occurrence of
electromagnetic interference or other types of interference between this appliance and other
appliances.

EMc information

Guidance and Manufacturer's Declaration - Electromagnetic Emissions: The goLITE BLU is
intended for use in the electromagnetic environment specified below. The user of the goLITE
BLU should make sure it is used in such an environment.
Emissions Test
RF emissions CISPR 11
RF emissions CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
Flicker emissions IEC
61000-3-3
Guidance and Manufacturer's Declaration - Electromagnetic Immunity: The goLITE BLU is
intended for use in the electromagnetic environment specified below. The user of the goLITE
BLU should make sure it is used in such an environment.
4222.002.7505.1.indd 23
from -20°C to +50°C
from 15% to 90% (no condensation)
14 x 14 x 2.5cm
0.4kg (less than 14 ounces)
468nm +/- 8nm
20nm
300μW/cm² +/- 10% at 50cm
Compliance Electromagnetic Environment - Guidance
Group 1 The goLITE BLU uses RF energy only for its
internal function. Therefore, its RF emissions
are very low and are not likely to cause any
interference in nearby electronic equipment.
Class B The goLITE BLU is suitable for use in all
establishments, including domestic
Class A
establishments and those directly connected
to the public low-voltage power supply
network.
Complies
EnglisH
23
05-06-09 12:26