Electromagnetic Compatibility (Emc) - Philips HF3430 Bedienungsanleitung

ENGLISH
10
Caution
- Do not use the appliance outdoors or near heated surfaces or heat
sources.
- This appliance contains an internal rechargeable lithium-ion battery
pack. Do not incinerate, disassemble or expose to high temperatures
above 50°C (122°F). Do not operate or charge the appliance at
temperatures below 5°C (4°F) or above 35°C (95°F). Batteries can
overheat, causing fire or bursting.
- Use the appliance in vertical position with the stand in place. Do not
use it in horizontal position without the stand or cover it, as this might
cause the appliance to overheat.
- Do not place heavy objects on the appliance, the adapter or the cord.
- Do not use the adapter in or near wall sockets that contain or have
contained an electric air freshener to prevent irreparable damage to
the adapter.
- When you remove the adapter from the wall socket, do not pull at
the cord but grasp the adapter directly to avoid cord damage.
- When you remove the small plug from the appliance socket, do not
pull at the cord but grasp the small plug directly to avoid cord damage.
Safety and compliance
- This Philips appliance complies with all applicable standards and
regulations regarding exposure to electromagnetic fields.
- This is a Class IIa medical appliance. It meets the requirements of
Medical Device Directive MDD 93/42/EEC and 2007/47/EC for
medical appliances.
- This is not a general illumination product.

Electromagnetic compatibility (EMC)

Portable and mobile radio frequency communication equipment, such as
mobile phones, cordless telephones and their base stations, walkie-talkies, and
wireless home network devices (routers), can affect the Philips EnergyUp.
They must therefore not be used in close proximity to the EnergyUp.
If this cannot be avoided, the EnergyUp must be observed to verify normal
operation. If abnormal performance (e.g. loss of functionality, light inconsistency,
flicker) is observed, additional measures may be necessary, such as re-
orientation of the radio frequency communication equipment or the EnergyUp
(see section 'EMC information' in chapter 'Specifications' for more details).