Travel Lock; Cleaning And Storage - Philips EnergyUp HF3430 Bedienungsanleitung

ENGLISH
16

Travel lock

You can activate the travel lock to prevent the appliance from being
switched on when a button is pressed accidentally while you travel or
carry the appliance.
1 To activate the travel lock, press and hold the standby button for
5 seconds (Fig. 12).
If the appliance is on, it switches off. The segments of the timer
,
indicator bar flash once to confirm that the appliance is locked.
When the appliance is locked, the segments of the timer indicator
,
bar will flash once when you press the standby button briefly to
indicate that the appliance is locked. If you touch the + or - button
while the appliance is locked, the appliance does not respond.
2 To deactivate the travel lock, press and hold the standby button for
5 seconds.
The appliance switches on.
,
The segments of the time indicator bar flash twice to confirm that
,
the appliance is unlocked.
The + and - buttons are active again.
,
Note: The travel lock is deactivated automatically when you connect the
appliance to the mains.

Cleaning and storage

Never immerse the appliance in water or any other liquid, nor rinse it
under the tap.
Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the appliance.
1 Clean the appliance with a dry or moist cloth. Do not use a wet cloth
(Fig. 13).
2 If you are not going to use the appliance for some time or if you
want to take it with you while travelling, put it in the travel pouch
for protection (Fig. 14).
3 Store the appliance in a safe and dry place.