GB Table of contents:
4. Parts ..................................................... 33
1.
In general
You bought a technical device, the handling is easy and simple, but requires the observance of
certain precautions. We therefore ask you to read the following instructions carefully!
For the operation of the filter system, you need a skimmer (surface skimmer). Either an integrated
skimmer (built into the pool wall - photo 1) or a suspended skimmer (attachment to the poolwall -
photo 2).
Photo 1 - integrated skimmer
Filterballs are included. Use 320 g in the sandfiltersystem. Your Pool Filter System has been engi-
neered and manufactured to our highest standard for dependability, ease of operation and safety.
With proper care, it will give you years of durable, trouble-free performance.
1.1
Safety warnings
Read alle the warnings below. Failure to do so could result in serius personal injury or death.
•
Risk of suction entrapment hazard, which, if not avoided can result in serious injury or death.
•
Do not block pump suction at the pump or in the pool as this can cause severe injury or death.
•
Electrical wiring MUST be installed by a trained professional and adhere to local code and regulations.
Page 30
MV-1080-09-2016 . Swim & Fun Scandinavia . info@swim-fun.dk . www.swim-fun.com
Photo 2 - suspended skimmer
© All rights reserved Swim & Fun Scandinavia ApS 2016