Cleaning and care
DANGER – ELECTRIC SHOCK!
►
Before cleaning the appliance, disconnect
the plug from the mains power socket!
Risk of electric shock!
Never submerge the thermostat
or other liquids!
WARNING! RISK OF INJURY!
►
Always allow the appliance to cool down
before cleaning it. Otherwise there is a risk
of burns!
ATTENTION! DAMAGE TO PROPERTY!
►
Do not use abrasive or aggressive cleaning
materials. These could damage the surface
of the appliance!
►
Do not use metal implements such as knives,
forks, etc. Should the non-stick coating become
damaged, discontinue use of the appliance.
■
It is best to clean the appliance as soon as it has
cooled down. This makes food residues easier
to remove.
■
Dismantle the appliance for cleaning:
–
Pull the thermostat
–
Tip the lid
of the hinge guides
–
Lift the griddle
–
Carefully remove the drip tray
frame
■
Empty the drip tray
water containing a mild detergent. Then rinse
the drip tray
■
8
│
GB
Downloaded from
www.Manualslib.com
from the socket
towards the rear and pull it out
.
out of the frame
from the
.
. Then rinse it in warm
with clean water and dry it off.
manuals search engine
■
Clean the lid
mild detergent. Then rinse the lid
water and dry it off.
■
After it has cooled down, wipe the griddle
with a damp cloth. The griddle
completely dry before it is used again.
NOTE
in water
►
If there is any stubborn residue on the griddle
you can soak the griddle
with a little detergent. Afterwards, rinse the
griddle
detergent residues remain on the griddle
►
The griddle
it is used again. Take particular care to ensure
that no moisture remains in the socket
■
Wipe the frame
moist cloth. If necessary, put a little mild detergent
on the cloth and wipe this off afterwards with
clear water. Dry everything properly.
■
Then reassemble the appliance.
Storage
■
Store the cleaned appliance in a clean, dust-free
and dry location.
■
When the appliance has been reassembled and
.
the catch on the lid
place, you can store the appliance upright to
save space.
.
in warm water containing a
with clean
must be
in warm water
with clean water. Ensure that no
must be completely dry before
and the thermostat
has clicked back into
STGG 1800 A2
,
.
.
with a