Assembly And Setting Up; Before First Use - Silvercrest STGG 1800 A2 Bedienungsanleitung

Assembly and setting up

WARNING! RISK OF FIRE!
► Never place the appliance underneath wall
cupboards or next to curtains, cupboard
walls or other flammable objects.
► Set up the appliance at least 70 cm from any
flammable materials (e.g. curtains).
► Always place the appliance on a heat-resistant
surface.
► Set up the appliance with its rear side directly
against the wall. When doing so, ensure that
the wall is made of heat-resistant material
and that the lid
1) Remove all of the parts from the box and
remove the packaging material and any
protective film.
2) Clean all components as described in Chapter
"Cleaning and care". Ensure that all parts are
completely dry.
3) Place the appliance on a heat-resistant, clean
and level surface.
4) Place the drip tray
it sits in the recess to the left of the centre.
ATTENTION! DAMAGE TO PROPERTY!
► Never use the appliance without the drip
tray ! Otherwise hot fat and other hot
liquids will drip down from the appliance
onto the surface below.
5) Place the griddle
Ensure that the socket
The griddle
otherwise the thermostat
nected to the socket
6) Push the hinges of the lid
the frame
■ 6 │
GB
Downloaded from www.Manualslib.com
can open fully.
in the frame
onto the frame
is on the right side.
must sit correctly in the frame
cannot be con-
.
into the recess on
and close the lid .
manuals search engine
7) Connect the thermostat
on the appliance. Ensure that the thermostat
pushed up to the stop in the socket
the appliance cannot heat up!
Before first use
1) Open the lid
the handle
the lid
Open the lid
into the hinge guides
in place.
2) Wipe the griddle
3) Close the lid
hinge guide
4) Insert the plug in a mains power socket and
set the temperature control
appliance will heat up.
5) Wait for 10 minutes.
6) Then disconnect the plug and allow the appli-
ance to cool down.
NOTE
so that
► The first time the appliance heats up, a small
amount of smoke and smell may be generated
due to production-related residues. This is
completely normal and is not dangerous.
Provide sufficient ventilation by opening a
window, for example.
7) Wipe the griddle
cooling.
.
8) Clean the drip tray
"Cleaning and care".
9) Ensure that all parts are completely dry before
operating the appliance.
The appliance is now ready for use.
with the socket
by pushing up the catch on
and, at the same time, pulling
upwards.
until the hinges slide down
and the lid
with a moist cloth.
by lifting it lightly into the
so that it can be folded shut.
to level 5. The
with a damp cloth after
as described in Chapter
STGG 1800 A2
is
. Otherwise
is firmly