Herunterladen Inhalt Inhalt Diese Seite drucken

Position Of Factory Nameplates; Chassis Number Position (Vin); Symbols On The Vehicle - Kärcher MC 250 Handbuch

Vorschau ausblenden Andere Handbücher für MC 250:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Braking characteristics
The brake pedal must be pressed in order to brake.
Note
Releasing the accelerator pedal provides no noticeable
braking effect.
Steering characteristics
The vehicle has 2-wheel steering and selectable 4-wheel
steering.
The 2-wheel steering is activated by default when starting
the vehicle (driving mode).
The 4-wheel steering can be selected as desired (working
mode).
The 4-wheel steering allows a tighter cornering than with
2-wheel steering.
Note
Avoid fast steering movements and drive slowly in bends.
Take the swinging at the rear into account.
Centre of gravity / pendulum characteristics
Rear attachments and load statuses influence the vehicle's
centre of gravity and the driving characteristics. You must
be ready to adjust to changed driving characteristics, par-
ticularly after changing attachments and in the case of
changeable load statuses. Limit ranges may be reached
earlier.
4.8

Position of factory nameplates

Note
The factory nameplates are in the direction of travel on the
right, inside the driver cabin next to the driver's seat.
1 Frame factory nameplate
2 Vehicle factory nameplate
3 Engine factory nameplate
4 Driver's seat
40
4.9

Chassis number position (VIN)

Note
The chassis number is located on the right side of the
frames in the direction of travel, in the area of the front
wheel.
1 Chassis number

4.10 Symbols on the vehicle

Note
Immediately replace illegible or absent symbols.
DANGER
Risk of burns from hot surfaces
Allow the vehicle to cool down before working on
it.
DANGER
Risk of burns due to hot exhaust pipe
Do not touch the exhaust pipe.
Before working, allow the exhaust pipe to cool
down.
DANGER
Danger of tilting
Only drive on terrain with a maximum lateral in-
cline of 10°.
DANGER
Risk of injury on account of splashing ob-
jects
Keep an adequate distance from persons, ani-
mals and objects.
WARNING
Risk of injury
Risk of being squeezed or hurt at the belts, side-
brushes, waste container, cover.
DANGER
Risk of crushing
When using the vehicle as a tractor, make sure
that there are no persons between the vehicle
and the trailer during operation.
English

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis