Rear Hydraulic Connections; Panels; Driver Cabin; Doors - Kärcher MC 250 Handbuch

6.3.2 Rear hydraulic connections

Note
Fit a dust cap to an unused connection to provide protec-
tion.
6.4

Panels

For various maintenance or cleaning work, the corre-
sponding panels must be opened.
Note
The illustration shows the vehicle without cover and driver
cabin.
Right radiator grille, hinged
1
Right-hand service flap
2
Bonnet/fresh water tank, hinged
3
Left-hand service flap
4
Radiator grille lock
5
Square wrench (special tool - included in the scope of
6
delivery)
1. Right radiator grille: Unlock with a square wrench and
swing outwards.
a Cleaning the combination cooler
b Cleaning the air-conditioner condenser
2. Right-hand service flap: swing out to open.
a Refilling with DEF or AdBlue®
b Checking / filling the wiping water
c Checking / topping up the expansion tank coolant
3. Bonnet/fresh water tank: Unlock with a square wrench
and swing outwards.
a Checking the engine oil level
b Emergency release of the parking brake
c Check the brake fluid filling level
4. Left-hand service: fold out to open.
a Check/clean the air filter
7

Driver cabin

7.1

Doors

Sliding window (2-piece)
1
Door lock
2
Door handle
3
Handle
4
Right-hand steering variant
5
Left-hand steering variant
6
Close both doors after parking the vehicle.
The driver's doors each serve as an emergency exit.
Right-hand steering variant
The driver's seat and the driver's door are located to the
right in the direction of travel, a second door is located on
the left side of the driver cabin.
Left-hand steering variant
The driver's seat and the driver's door are located to the
left in the direction of travel, a second door is located on
the right side of the driver cabin.
Entry and exit aid
Handles that can be used as entry and exit aids are locat-
ed inside the doors and on the A-pillar.
English 45