Saving A Measurement; Displaying Added Measured Values; Deleting Measured Values; Saving Own Food Codes - Silvercrest HG04458A Bedienungs- Und Sicherheitshinweise

Saving a measurement

You can save all displayed values for a food. The
product will automatically add the values to each
saved measurement. For instance, you can enter every
item of food you eat over the course of a day and
view the data at the end of the day. The saved values
are retained, even after you switch off the product or
change the batteries.
Switch on the product and place the food as
described in section "Weighing" onto the weigh-
ing surface .
1
Enter the 3-digit food code as described in section
"Displaying nutritional and energy values".
Press the Button M+
along with the nutritional and energy values. The
measurement save display
XX will be represented as 2 digit number, i.e.,
∑M 01.
After saved the weight along with nutritional and
energy values, remove the food and then place
another food on the weighing surface
Proceed in the same way to save the weight of the
food and the corresponding nutrient and energy
values. The number of the memory space of the re-
spective weight as well as of the nutrient and energy
values is increased by one after each further saving.
Those number from the last weighing are displayed
approx. 4 seconds.
Note: The memory can store up to 99 measure-
ments. To be able to save further measurements,
delete the saved data by pressing the button MC
.
8
Important: All previously saved measured values
are deleted after pressing the button MC
Note: If the number of stored measurements
(weight, nutritional and energy value) exceeds
the maximum storage capacity, the corresponding
display , will show "0-Ld". "∑M" and the 2
11 17
to save the measured weight
9
will show ∑M XX.
12
.
1
8
digits from the last process both flash to indicate
that no further measurements can be saved. The
following maximum values apply:
Weight:
PROT (protein):
FAT (fat):
CARB
(carbohydrates):
BE (bread units):
KJ (kilojoules):
KCAL (kilocalories): 99999
CHOL (cholesterol): 999.9 mg / 9.999 oz
Displaying added
measured values
You can call up added measured values at any time.
Press the button MR
measured values appear in the display
about 10 seconds.
If you do not press any other buttons for about
10 seconds, the product will go back to weighing.

Deleting measured values

Press the button MC
saved measured values. All measured values are
deleted.

Saving own food codes

Note: You can assign a code to further foods and
.
save the nutritional and energy values in memory en-
tries 800-999 (empty at delivery). The nutritional and
energy values you enter each refer to 100 g of food.
99.999 kg / 99:15.9 lb'oz /
999.95 oz
9999.9 g / 999.99 oz
9999.9 g / 999.99 oz
9999.9 g / 999.99 oz
999.99
99999
. The totals of all saved
4
,
11
if you wish to delete the
8
GB/IE/NI
for
17
11