Warnings - CareFusion SprintPack Bedienungsanleitung

Warnings

These warnings apply any time you handle or operate the SprintPack Li-Ion
Power System.
WARNING

LTV
accepts approved power sources with a voltage rating
of 11 – 15 Volts DC (VDC). Do not apply more than 15
VDC to an LTV
components may occur.

Read instructions - Before operating the SprintPack
Li-Ion Power System , read all instructions, warnings,
cautions, and notes.

Risk of electric shock - To reduce the risk of electrical
shock and damage to the SprintPack Li-Ion Power
System , do not expose it to snow, rain, or liquid of any
kind. Do not operate the SprintPack Li-Ion Power
System if any part has been dropped or damaged in
any way. Contact CareFusion for service or support.

Unauthorized repairs - Do not disassemble the
SprintPack Li-Ion Power System, or any connectors, or
use the SprintPack Li-Ion Power System if any piece
is damaged. Do not try to repair any part of the
SprintPack Li-Ion Power System . Contact CareFusion
for service or support.

Disconnect before cleaning - To reduce the risk of
electrical shock, always disconnect the SprintPack Li-
Ion Power System from the ventilator and/or input
power source before cleaning.

Alternate power supply - It is recommended that an
alternative means of supplying external power to the
ventilator be available at all times.
1-2
®
Ventilator power input - The LTV
®
Ventilator, as damage to internal
Operator's Manual - SprintPack™
®
Ventilator
18415-001, Rev. E