Package Contents; Technical Specifications; General Power Tool Safety Warnings - Parkside PWS 125 F5 Originalbetriebsanleitung

Package contents

1 angle grinder
1 additional handle
1 blade guard
1 two-hole assembly spanner
1 cutting disc
2 spare carbon brushes
1 set of operating instructions
Technical specifications
Rated voltage
Rated power
consumption
Rated idle speed
Disc size
Thread size
Protection class
Noise and vibration data
Noise measurement value determined in accord-
ance with EN 60745. The A-rated noise level of
the power tool is typically as follows:
Noise emission value
Sound pressure level L
Uncertainty
Sound power level
Uncertainty
Wear ear muffs!
Total vibration value
Surface grinding
Uncertainty
PWS 125 F5
230 V ∼ 50 Hz
(AC)
1200 W
n 3000–12000 rpm
Ø 125 mm
M14
II / (double insulation)
= 91.6 dB (A)
PA
K = 3 dB
L = 102.6 dB (A)
WA
K = 3 dB
a = 10.129 m/s
h, AG
K = 1.5 m/s 2
NOTE
► The vibration emission values and the noise
emission values given in these instructions
have been measured in accordance with
a standardised test procedure and can be
used for comparison of the power tool with
another tool.
► The specified total vibration values and noise
emission values can also be used to make a
provisional load estimate.
WARNING!
► Depending on the manner in which the power
tool is being used, and in particular the kind
of workpiece being worked, the vibration and
noise emission values can deviate from the
values given in these instructions during actual
use of the power tool.
► Try to keep the vibration load as low as pos-
sible. Measures to reduce the vibration load
are, e.g. wearing gloves and limiting the work-
ing time. Wherein all states of operation must
be included (e.g. times when the power tool is
switched off and times where the power tool is
switched on but running without load).
General power tool
safety warnings
WARNING!
► Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious
2
injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-op-
erated (cordless) power tool.
GB │ MT │
51 ■